Eduard

DISCONTINUED Eduard 82139 Fw 190F-8 Profipack edition

Fw 190F-8 Profipack edition - Image 1
Scală: 1:48
Producător: Eduard
Codul produsului: edu82139
Disponibilitate actuală: 2-6 saptamani
210.35 RON sau 30600 pct.

Include 19% TVA
la livrarea in tara: România
Pentru a schimba tara click aici

Informații principale

ProducătorEduard
Codul produsuluiedu82139
Greutate:0.52 kg
Ean:8591437558452
Scală1:48
Adăugat în catalog:19.3.2021
Tags:Focke-Wulf-Fw-190

Kit versiunea de luptă-bombardier german pentru cel de-al doilea război mondial a Fw 190F-8 la scară 1/48. - piese din plastic: Eduard - optiuni de marcare: 7 - autocolante: Eduard - piese PE: da, prevopsite - masca de vopsit: da

The Focke-Wulf Fw-190 is a German, single-engine, full-metal fighter aircraft with a covered cabin in the low wing design of the Second World War. The pilots considered the Fw-190 to be a better aircraft than the Messerschmitt Bf-109. A self-supporting low wing with a working Fw-190 coating was commissioned by the Luftfahrtministerium, assembled in the fall of 1937. Kurt Tank submitted two propulsion proposals - the first with a liquid-cooled Daimler-Benz DB 601 engine, and the second with the new BMW 139 radial engine. The latter was chosen, and the work started in the spring of 1938 was headed by Obering R. Blaser. The first prototype of the Fw-190V1 was ready in May 1939, and it was flown in Bremen on June 1, 1939 by Captain Hans Sander. The second prototype, the FW-190V2, armed with two MG131 and two MG17 machine guns - all 7.92 mm caliber, was flew in October 1939. To reduce aerodynamic drag, both were equipped with a tunnel air inlet in the propeller cap, but problems with overheating of the engine resulted in a return to the proven NACA shield design. Before the tests of these prototypes began for good, the decision was already made to replace the BMW 139 engine with a stronger, but longer and heavier BMW 801. It required many changes, strengthening the structure and moving the cabin back, which later became a source of problems with the center of gravity. The advantage was the removal of problems with exhaust gas permeation and overheating of the cabin interior due to its direct vicinity to the BMW 139 engine. The third and fourth prototypes were abandoned, and the Fw-190V5 with the new engine was completed at the beginning of 1940. Later, it received wings with a wingspan enlarged by one meter (from the original 9.5 m), which made it 10 km / h slower, but it increased the rate of climb and improved maneuverability. It was marked Fw-190V5g, and the variant with the shorter wing was Fw-190V5k. The first seven machines of the Fw-190A-0 information series had a short wing, the rest - a longer one. The first operational unit equipped with the Fw-190 - 6./JG 26 stationed at Le Bourget, declared its operational readiness in August 1941 and from the first meeting of the new fighter with the British Supermarine Spitfire, its advantage over them became apparent. During the war, a dozen or so versions of this great plane were created. The machines of the "A" version, along with a dozen or so modernizations, served as fighter planes. The versions marked "B" and "C" were only prototypes of high-altitude fighters intended for fighting strategic bombers, but they did not enter into serial production. The "D" variant, as the only one of the Fw-190s, was powered by the new 1750HP Jumo 213A engine and was the German response to the P-51 Mustang. The new engine extended the fuselage by several dozen centimeters. This variant also performed mainly hunting and high-altitude fighter tasks. Numerous variants of the "F" version were used as fighter-bombers as direct support of the battlefield. The "G" version played the same role as the "F" version, but had a greater range. During the entire war, over 20,000 copies of this one of the best fighters of World War II were produced. Technical data (version Fw-190A-8): length: 9m, wingspan: 10.51m, height: 3.95m, maximum speed: 656km / h, rate of climb: 15m / s, maximum range: 800km, maximum ceiling 11410m , armament: fixed-2 MG131 13mm machine guns and 4 MG151 20mm cannons (2 MG 151 / 20E cannons for the D-9 version).

3_edu82139_instruction_sheet.pdf
Greșeală în descriere? Raportează eroarea
Opiniile clienților noștrii
Adaugă opinia ta despre: Fw 190F-8 Profipack edition
...
Adăugat în catalog: 19.3.2021
Disponibilitate actuală: 2-6 saptamani
  • produs disponibil
  • produs indisponibil
  • produs disponibil la comandă
  • livrarea produselor
  • lipsă
  • 1 bucată
  • 2 bucăți
  • 3-5 bucăți
  • 6-10 bucăți
  • peste 10 bucăți
Putem aduce un produs care nu este pe site sau e indisponibil?
Eventuale accesorii

Scală: 1:48
Producător: Eduard
Codul produsului: eduEX500
Disponibilitate: disponibil!

26.91 RON sau 3900 pct.

Scală: 1:48
Producător: Eduard
Codul produsului: eduEX054
Disponibilitate: disponibil!

19.82 RON sau 2900 pct.

Scală: 1:48
Producător: Eduard
Codul produsului: edu3DL48017
Disponibilitate: disponibil!

54.08 RON sau 7900 pct.

Scală: 1:48
Producător: Eduard
Codul produsului: edu648650
Disponibilitate: disponibil!

217.57 RON sau 31700 pct.

Scală: 1:48
Producător: Eduard
Codul produsului: edu648824
Disponibilitate: disponibil!

144.24 RON sau 21000 pct.

Scală: 1:48
Producător: Eduard
Codul produsului: edu48560
Disponibilitate: disponibil!

61.17 RON sau 8900 pct.

Scală: 1:48
Producător: Eduard
Codul produsului: edu481048
Disponibilitate: 2-6 saptamani

91.59 RON sau 13300 pct.

Scală: 1:48
Producător: Eduard
Codul produsului: eduSIN64874
Disponibilitate: 2-6 saptamani

274.06 RON sau 39900 pct.

Scală: 1:48
Producător: Eduard
Codul produsului: edu481047
Disponibilitate: 2-6 saptamani

84.61 RON sau 12300 pct.

Scală: 1:48
Producător: Eduard
Codul produsului: eduEX505
Disponibilitate: 2-6 saptamani

26.91 RON sau 3900 pct.

Scală: 1:48
Producător: Eduard
Codul produsului: edu648649
Disponibilitate: 2-6 saptamani

140.63 RON sau 20500 pct.

Scală: 1:48
Producător: Eduard
Codul produsului: edu648633
Disponibilitate: 2-6 saptamani

140.63 RON sau 20500 pct.

Produse asemănătoare

Scală: 1:72
Producător: Plastyk
Codul produsului: PLK013
Disponibilitate: disponibil!

17.06 RON sau 2500 pct.

Scală: 1:72
Producător: Heller
Codul produsului: hlr56235
Disponibilitate: disponibil!

57.09 RON sau 8300 pct.

Scală: 1:72
Producător: Kora Models
Codul produsului: KOR-KPK72031
Disponibilitate: disponibil!

162.27 RON sau 23600 pct.

Scală: 1:72
Producător: Eduard
Codul produsului: edu70119
Disponibilitate: disponibil!

81.01 RON sau 11800 pct.

Scală: 1:72
Producător: Revell
Codul produsului: rev03898
Disponibilitate: disponibil!

48.31 RON sau 7000 pct.

Scală: 1:33
Producător: MPM Model
Codul produsului: MMM2-2015
Disponibilitate: disponibil!

56.53 RON sau 7200 pct.

Scală: 1:72
Producător: Revell
Codul produsului: rev63898
Disponibilitate: disponibil!

88.58 RON sau 12900 pct.

Scală: 1:72
Producător: Eduard
Codul produsului: edu7440
Disponibilitate: 2-6 saptamani

51.44 RON sau 7500 pct.

Scală: 1:72
Producător: Kora Models
Codul produsului: KOR-KPK7234
Disponibilitate: 2-6 saptamani

162.27 RON sau 23600 pct.

Scală: 1:72
Producător: Kora Models
Codul produsului: KOR-KPK7233
Disponibilitate: 2-6 saptamani

162.27 RON sau 23600 pct.

Scală: 1:72
Producător: Kora Models
Codul produsului: KOR-KPK72115
Disponibilitate: 2-6 saptamani

174.29 RON sau 25400 pct.

Scală: 1:72
Producător: Kora Models
Codul produsului: KOR-KPK7232
Disponibilitate: disponibil la comandă

162.27 RON sau 23600 pct.