Haliński

Haliński KA-SET-3-2004 Polikarpow I-16 - Soviet Fighter (Model With Laser Cut Frames)

Polikarpow I-16 - Soviet Fighter (Model With Laser Cut Frames) - Image 1
Scală: 1:33
Producător: Haliński
Codul produsului: HAL-KA-SET-3-2004
Disponibilitate actuală: disponibil!
147.84 RON sau 18900 pct.

Include 19% TVA
la livrarea in tara: România
Pentru a schimba tara click aici

Informații principale

ProducătorHaliński
Codul produsuluiHAL-KA-SET-3-2004
Greutate:0.17 kg
Scală1:33
Adăugat în catalog:8.11.2016
Tags:Polikarpow-L-16
The Polikarpov I-16 is a Soviet, single-engine low-wing fighter in a mixed design with a classic tail. The prototype's flight took place in 1933. The I-16 turned out to be one of the most modern fighters of that period. It had retractable wheels, modern wing geometry and the ability to change the "turn" of the propeller. At the same time, however, due to its short hull, it was very difficult to pilot and required a lot of attention from the pilot. I-16 had its baptism of fire during the Spanish Civil War, where about 500 units were delivered to the republican troops. The plane surprised the Frankists with its incredible maneuverability, firepower and speed of climb. In 1939, the I-16s was sent to China, which was fighting against Japan, and there it surprised its opponents again. Initially, the M-22 engine was used as a power unit, but on subsequent versions it was replaced with other power units, min. M-25 or M-63. The I-16 remained in the line on the Eastern Front until 1942, serving as not only a fighter, but also an attack aircraft. Technical data (version I-16 Type 24): length: 6.13m, wingspan: 9m, height: 3.25m, maximum speed: 525km / h, rate of climb: 14.7m / s, practical ceiling: 9700m, range maximum: 700km, armament: fixed - two 7.62mm SzKAS machine guns and two 20mm ShWAK cannons, suspended - up to 500 kg of bombs.
Greșeală în descriere? Raportează eroarea
Opiniile clienților noștrii
Adaugă opinia ta despre: Polikarpow I-16 - Soviet Fighter (Model With Laser Cut Frames)
...
Adăugat în catalog: 8.11.2016
Disponibilitate actuală: disponibil!
  • produs disponibil
  • produs indisponibil
  • produs disponibil la comandă
  • livrarea produselor
  • lipsă
  • 1 bucată
  • 2 bucăți
  • 3-5 bucăți
  • 6-10 bucăți
  • peste 10 bucăți
Putem aduce un produs care nu este pe site sau e indisponibil?
Eventuale accesorii

Producător: Abteilung502
Codul produsului: ABT-713
Disponibilitate: disponibil!

245 RON sau 30400 pct.

Produse asemănătoare

Scală: 1:33
Producător: Haliński
Codul produsului: HAL-KA-3-2004
Disponibilitate: disponibil!

102.25 RON sau 13100 pct.

Scală: 1:33
Producător: Betexa
Codul produsului: BET2022
Disponibilitate: disponibil!

22.95 RON sau 3300 pct.

Scală: 1:33
Producător: Modelik
Codul produsului: mod08_08
Disponibilitate: disponibil!

40.92 RON sau 5200 pct.

-8%

Scală: 1:72
Producător: A-Model
Codul produsului: AMO-72123
Disponibilitate: disponibil!

57.69 RON 53 RON
sau 8400 pct.

-8%

Scală: 1:72
Producător: A-Model
Codul produsului: AMO-72124
Disponibilitate: disponibil!

57.69 RON 53 RON
sau 8400 pct.

Scală: 1:48
Producător: Clear Prop Models
Codul produsului: CLR4814
Disponibilitate: disponibil!

176.69 RON sau 25700 pct.

Scală: 1:72
Producător: Clear Prop Models
Codul produsului: CLR72023
Disponibilitate: disponibil!

99.52 RON sau 14500 pct.

Scală: 1:48
Producător: Eduard
Codul produsului: edu8149
Disponibilitate: disponibil!

97.72 RON sau 14200 pct.

Scală: 1:72
Producător: Clear Prop Models
Codul produsului: CLR72048
Disponibilitate: disponibil!

121.40 RON sau 17700 pct.

Scală: 1:72
Producător: Clear Prop Models
Codul produsului: CLR72025
Disponibilitate: disponibil!

99.52 RON sau 14500 pct.

Scală: 1:48
Producător: Eduard
Codul produsului: edu8148
Disponibilitate: disponibil!

146.64 RON sau 21300 pct.

Scală: 1:48
Producător: ICM
Codul produsului: icm48098
Disponibilitate: disponibil!

99.64 RON sau 14500 pct.